Skip to content
Sandstone workers' cottage with a navy front door on a Balmain street

Inner West Rising Damp

Peeling paint at skirting height or a wall that never dries? Get a free moisture check and a written quote from a local damp proofing team.

Old brick and sandstone walls pull water up from the ground. We test where it is coming from, stop it with the right damp-proof course for your wall, and make good the plaster afterwards.

Get a free quote

Takes a minute. A local damp specialist will call you back.

No obligation. Your details only go to one local damp specialist.

  • Free on-site moisture check
  • Written quote before work starts
  • Lime-compatible wall repairs

From moisture check to dry wall in the Inner West

  1. Moisture checkWe read the walls, look outside and under the floor, and tell you what is causing the damp.
  2. Written quoteYou get the method, the walls involved and a fixed price in writing.
  3. Damp-proof courseThe new barrier goes in along the affected walls, with drainage or airflow fixed where needed.
  4. Wall repairsSalty plaster comes off, the wall dries, and a salt-resistant render finishes the job.
Federation hallway wall with a faint tide mark above the skirting

Inner West rising damp, tested before it’s treated

Rising damp is common in the Inner West because so many of its houses were built before damp-proof courses were reliable. Federation cottages in Marrickville and Dulwich Hill, brick semis in Leichhardt and Petersham, and sandstone workers’ cottages on the Balmain peninsula all sit on footings that have been drawing water from the ground for a century or more. When the old barrier fails, water climbs into the brick or stone, and the inside walls show it with flaking paint, crumbling plaster and a stale smell in the front rooms.

We start every job by finding out what is actually wetting the wall. Not every damp wall has rising damp, and the fix for a leaking downpipe or a cold, unventilated room is very different from the fix for water rising out of the ground. So the first visit is a free moisture check: readings at several heights on each damp wall, a salt test on the plaster, a look at the ground and drainage outside, and a check under the floor where there is one. You get a plain answer on the day and a written quote afterwards.

What we do for damp walls in the Inner West

Each wall gets the treatment that suits how it was built.

  • Rising damp treatment covers the whole job, from testing to a finished wall.
  • A chemical damp course is injected into a mortar joint along the base of brick walls. It suits most brick houses and is done without taking the wall apart.
  • A physical damp course puts a membrane into the wall in short sections, for rubble sandstone, soft early bricks and walls injection can’t treat.
  • Subfloor ventilation gets air moving under timber floors again, through cleared vents, new air bricks or quiet inline fans.
  • Salt-damaged plaster repair strips out the salty plaster and replaces it with a render made for damp-affected walls.
  • Waterproof tanking and drainage keep water off walls that have soil or paving pressed against them.

Most houses need two or three of these together, and the quote explains which walls get what.

Why so many Inner West walls are damp

The housing is old, solid and close to the ground. Most walls were built of solid brick or stone with no cavity, so nothing breaks the path of water from the footing to the plaster. Original damp courses of slate, bitumen or tarred felt have cracked, crumbled or been bridged. And over the years the ground around many houses has risen. Courtyards have been concreted up to the back door, side paths relaid higher, and garden beds piled against the brickwork, so rain and ground water sit against the wall above the old barrier.

Inside, many houses have been replastered with gypsum and painted with acrylic. Those finishes trap moisture and salt instead of letting the wall breathe, so the damage shows faster than it did with the original lime plaster.

Mould that won’t stay away

Mould along the base of Inner West walls or behind wardrobes nearly always has damp behind it: an old damp course, a concreted courtyard, sealed plaster or a stale subfloor. Our free moisture testing shows which, and mould prevention work fixes it so the mould has nothing to grow on. We don’t clean mould; we deal with the damp that causes it.

How the job runs

After the moisture check you get a written quote listing each wall, the method and the price, including the plaster repairs. On the day, furniture is moved and covered, floors are protected, and the damp course goes in. The salty plaster comes off, the wall is left to dry for the time set for its thickness, and a salt-resistant render goes back on, ready for paint. Most single-storey jobs need a day or three of work on site, plus drying time before the final render.

Not sure it’s rising damp?

Our page on rising damp symptoms shows what each sign looks like and what usually causes it. Then try our guides. Rising damp or condensation explains how to tell water rising from the ground apart from water forming on cold surfaces. Damp walls after rain covers leaks, splashback and drainage problems that look like rising damp. And if your house is stone, rising damp in sandstone walls explains why it needs different treatment.

Or book the free moisture check, and we’ll tell you on site what is causing the damp and what it will take to fix it.

Inner West suburbs we damp proof

Pick your suburb for local detail, or just call. We cover the whole Inner West.

Show all 54 suburbs
  • 54Inner West suburbs
  • 6Damp services in one visit
  • FreeMoisture check

How we approach Inner West damp

  • Tested before it is treated

    Meter readings at several heights, a look at the ground outside and a check under the floor tell us whether the water is rising, leaking or condensing before anything is quoted.

  • Matched to the wall

    Injection suits most brick walls; rubble sandstone and soft bricks often need a physical course or drainage instead. You get the method that suits your wall, with the reason written down.

  • Repairs priced upfront

    Stripping the salty plaster and re-rendering is part of the written quote, so the price you agree to is the price of a finished wall.

Questions about rising damp in the Inner West

Something else on your mind? Call 02 9158 9931 and ask.

Do you cover my suburb?

We cover the whole Inner West, from the harbour suburbs of Balmain, Birchgrove and Drummoyne through Leichhardt, Marrickville and Dulwich Hill, out to Ashfield, Burwood and Strathfield, and south to the Cooks River.

Is a heritage house harder to damp proof?

It needs more care rather than more work. Methods that keep original brick and stone, lime-compatible mortars and breathable finishes suit older walls and sit comfortably with heritage controls in conservation areas.

How soon can you come out?

Most moisture checks are booked within a few days. Call or send the form with your address and a photo of the wall if you have one.

Is the moisture check free?

Yes. There's no charge and no obligation to book any work.

Can you tell rising damp from condensation?

Yes. Rising damp sits low and is there in dry weather; condensation forms on cold surfaces such as windows, ceilings and corners and follows the weather and how the room is used. Readings and where the damp sits make it clear.

Will the check damage my walls?

No. Readings are taken with a meter. Nothing is cut or drilled during the check.

Walls staying damp in the Inner West?

📞 Call now Free quote